Back in the Debug tab, in the Initilization File field, use the.A correct configuration for Corestone-300 can be as follows:įast Models Debug Driver Configuration explains the configuration dialog in details. Configuration File: points to the file with model configuration parameters (passed to the model executable with -f option).Click the Browse button (.) and select the target CPU available on the target. Target: specifies the CPU to be used for execution.Arguments: can be used to specify additional FVP command-line options to be used with the model execution.Command: shall contain the path to the AVH model executable file that corresponds to the selected AVH device.This opens corresponding Models Target Driver Setup_ dialog. The exact name varies slightly depending on the target device core: Models Cortex-M Debugger for Cortex-M0/M0+/M3/M4/M7 devices and Models ARMv8-M Debugger for Cortex-M23/M33/M55/M85.įor example for Corstone-300 with a Cortex-M55 core: In Use: drop-down menu select the Models Debugger.Perform the following steps to configure execution and debug of an MDK project on an AVH device: In the list select the target device according to the table in Project Configuration and press OK.Expand the group of your target Cortex-M core.In the list of device vendors expand ARM group.In the project open Options for target.Select AVH device as the target in your project:.Observe the button status changed to Up to date and return to the project in µVision.Press Install or Update button in the Action field to get the latest version installed.In the Packs tab under Device Specific category select the target CMSIS pack that implements the required AVH device according to the table in Project Configuration.In Devices tab expand ARM section and select the target Cortex-M core.Install the CMSIS pack with target device definition, if not present yet:.When creating a new project or when changing the target in an existing project you need to select an FVP target as follows: If you agree to that, also the necessary pack with device definition for the target device used in the project will be automatically installed. cprj file you will be asked if any missing packs required by the project shall be installed. When opening an existing MDK project or importing it from a. 1 The Fixed Virtual Platforms can be found in the /ARM/VHT/ folder in the MDK installation directory as used for Tools Installation, for example, C:/Keil_v5/ARM/VHT/.ĪVH device support is implemented with the same CMSIS principles as used for real hardware targets and explained in CMSIS Pack and CMSIS-Core(M). Same device definition is used, but a model shall be selectedĭepending on the required microNPU (none, Ethos-U55 or Ethos-U65) Arm Cortex-M coreĬPU with Cortex-M4 core and Floating Point Unit (FPU) supportĬPU with Cortex-M7 core and Single Precision FPU supportĬPU with Cortex-M7 core and Double Precision FPU supportĬPU with Cortex-M33 core and Floating Point Unit (FPU) support Table below lists the Cortex-M cores supported with Arm Virtual Hardware, corresponding device names, the CMSIS Pack with device support, as well as simulation models provided with MDK. This step is typically needed for setting up any project, but with reference AVH examples brief verification of the default settings can be sufficient.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |